Colorite FluoroCarbon

Colorite FluoroCarbon
20
YEARS
WARRANTY

ColoRite FluoroCarbon was Developed to Provide Extra Durability, Excellent Weatherability, and High Formability for Exterior Applications.

Standards

Substrate : ASTM A653/A653M
Paint Coating : ASTM A755/755M


ColoRite FluoroCarbon is a Paint system comprising hot-dip galvanized steel sheet with a minimum Zinc coating mass of 275 gsm (G90) that is painted on and oven cured with FluoroCarbon paint manufactured from Kynar 500 or Hylar 5000 resin, along with a custom-formulated high-performance primer. This produces a nominal paint dry film thickness of 25 microns on the top surface (inclusive of primer) and 10 microns on the bottom (inclusive of primer). ColoRite FluoroCarbon was developed to provide extra durability, excellent weatherability, and high formability for exterior applications.

Substrate

Galvanized steel – minimum G90 (275 GSM).
Grade CS type A & B, FS Type A & B , SS 33, SS40 , SS50.

Typical Uses

Roofing and Walling , Sandwich Panels, K-Span, etc.

Dimensions: (For normal supply products)

Thickness* (mm) Width** (mm)
From 0.45 to 1.20 From 50 to 1320

* For grade SS50, minimum thickness is 0.50 mm
** For width less than 1000 mm are supplied with slit edge
For specific dimensions please contact Sales and Marketing Dept.

Pretreatment Corrosion resistance proprietary conversion coating.
Primer Coat Polyurethane Primer
Nominal thickness- 5 microns on Top side & Polyester Primer on Bottom side.
Finish Coat Custom formulated system. Polyvinylidene Fluoride (PVDF).
Nominal thickness-20 microns on the top or weather side.
The finish coat is available in RAL standard colours. Other colours may be available on request.
Backing Coat Custom formulated Backer-5-7 microns or Foam suitable Backer.
Special backer suitable for foam application can also be provided.
Back coat can be in the same top coat color and DFT as required
Gloss (60˚) Nominal 25-30% (60˚)
Other gloss levels may be available on request.

Guaranteed Paint Properties

Test Test Method Description Results
Hardness (Pencil) ASTM D 3363 Pencil B or harder
Adhesion -T bend ASTM D 4145 T-bend 2T or less (No Pickoff)
Flexibility ASTM D 4145 T-bend 3T or less (no cracking)
Adhesion – Reverse impact ASTM D 2794 Reverse impact > 10 joules
Cross Hatch ASTM D 3359 Cross hatch > No paint removal
Gloss 60˚ (%) ASTM D 523 Gloss 25-30
Color Difference ASTM D2244
Light colors Δ E – ≤1.0
Medium Colors Δ E – ≤ 1.5
Dark Colors Δ E – ≤2.0 / Visual match
Metallics Visual match

Expected Product Service Performance

Property Test Method Description Results
Resistance to UV
(QUV-A) ASTM G53
Exposure Hours 2000 Hrs
ASTM D2244 Color Change DE Hunterlab –
Light color ≤3
Int.Color ≤5
Dark color ≤7
ASTM D4214 Chalking ASTM Rating 6
ASTM D523 % Gloss Retention ≥ 80
Natural well washed exposure
ASTM G7
Exposure Hours 20 Yrs
ASTM D2244 Color Change
(Non Vertical)
DE Hunterlab –
Light color ≤6
Int.Color ≤9
Dark color ≤15
ASTM D4214 Chalking ASTM Rating 6
ASTM D523 % Gloss Retention ≥ 60
Resistance to corrosion (Salt Spray)
ASTM B117
Exposure Hours 1000 Hrs
ASTM D714 Blister Density & Size Blister density- Few,
Blister size rating ≥8
Resistance to humidity
at 38± 1°C
ASTM D 2247
Exposure Hours 1000 Hrs
ASTM D714 Blister Density & Size Blister density- Few,
Blister size rating ≥8
Resistance to Abrasion ASTM D 968 Falling sand test 40 ltrs for 25 µm
ISO 1518 Scratch ≥ 2000gms
Resistane to Heat
(ECCA T13)
ASTM D2244 90°C – 700 hours or
60°C – 1000 Hours
ΔE ≤ 2.5 ,
ΔGloss ≤ 3%
Kesternich ASTM G87 Cycles 10 Cycles
Chemical Resistance
(Acid & Alkali)
AAMA 621 HCL, HNo3 & H2So4 No discoloration/No blistering
Resistance to solvents ASTM D1308 Solvent No discoloration/No blistering
Resistance to Fire BS 476 Part 7 Fire rating Class M0
WordPress Image Lightbox