Slitting

service-slitting

Specification


UNICOIL has downstream facilities to slit galvanized steel coils into narrower widths according to customer requirements as per the table below. Required individual slit coil weights and pallet weights can be supplied.

UNICOIL has a special slitting line to meet the requirements of the cable industry for the galvanized armor steel tape applications. UNICOIL can supply slit coils with inner diameters of 160 mm, 200mm and 300 mm.

Parameter Min Max
Thickness (mm) 0.25 2.00
Coil Inner Diameter (mm)*** 508
Coil Outer Diameter(mm) 1200
Slit Width (mm)* 45 1250
Slit Coil Mass (Metric Tons)** 12

* Minimum slit width depends on thickness
** Mass of the slit coil depends on its width
*** Inner diameter of 160,200 and 300mm is available on request for Galvanized armor steel tape

slitted-coils

Mass of the slit coil depends on its width

Premium Packaging for Slitted Coils


slit-coil-packaging-en

Galvanized steel coils are packed either vertically ( “eye to the sky,” on pallets) or horizontally (“eye to the wall”), depending on the slit width and considering safety aspects for handling. For packing in the vertical position, each slitted coil is separated by wooden spacers for ease of handling, and each separated set of slitted coils is enveloped by VCI paper and placed on a strong wooden pallet. A steel outer ring is put around the set of slitted coils, and the entire set of slitted coils is tightly strapped to strong wooden pallets to ensure protection from damage during handling and storage. The horizontal packing is similar to that of galvanized steel coils.

UNICOIL has downstream facilities for slitting pre-painted steel coils into narrower widths to meet customer requirements, as per the following table. Individual slit weights and pallet weights can be supplied as required.

Parameter Min Max
Thickness (mm) 0.40 1.2
Coil Inner Diameter (mm) 508
Coil Outer Diameter(mm) 1200
Slit Width (mm) 45 1250
Slit Coil Mass (Metric Tons)* 6
ppgi-slit-coils

Mass of the slit coil depends on its width

Premium Packaging for Slitted Coils


ppgi-slit-coil-packaging

Pre-painted steel slitted coils are packed vertically (“eye to the sky,” on pallets). Each slitted coil is separated by wooden spacers for ease of handling, and each such separated set of slitted coils is enveloped by a VCI (vapor-corrosion-inhibitor) paper and placed on a strong wooden pallet. A steel outer ring is put around the set of slitted coils, and the entire set of slitted coils is tightly strapped to strong wooden pallets to ensure protection from damage during handling and storage.

WordPress Image Lightbox