Русский
Italiano
Français
Español
Deutsch
العربية
Molawan AntiBacterial
Molawan AntiBacterial is a Cost-Effective Pre-Painted Steel Developed to Provide Microbial Protection for Interior and Exterior Applications.
Standards
- Substrate : ASTM A653/A653M
- Paint Coating : ASTM A755/755M
Molawan AntiBacterial is a cost effective pre-painted steel developed to provide microbial protection for interior and exterior applications. The paint system consists of anti microbial agents, applied on a Galvanized substrate of 90 gsm minimum zinc coating, with paint film thickness of 20 microns on weathering side. The anti microbial agent in the paint is designed to inhibit the growth of odor causing bacterial and prevent product deterioration of the product from mold and mildew.
Substrate
Galvanized steel, minimum G30(90 GSM).
Grade : CS Type A&B, FS Type A&B, SS33, SS40 & SS50
Typical Uses
Roofing and Walling, Sandwich Panels, Cool Rooms, Clean Rooms, Appliances, K-span, Shutter Doors, Door Frames
Dimensions:
| Thickness* (mm) | Width** (mm) |
| 0.30 to 1.20 | From 50 to 1320 |
* For grade SS50, minimum thickness is 0.50 mm
** For width less than 1000 mm are supplied with slit edge
For specific dimensions please contact Sales and Marketing Dept.
| Pretreatment | Corrosion resistance proprietary conversion coating each side |
| Primer Coat | Universal Corrosion inhibitive Primer Nominal thickness- 5 microns each side |
| Finish Coat | Custom formulated system with Microbial Agent. Nominal thickness-15 microns on the top or weather side. |
| Backing Coat | Polyester based custom formulated off white. Nominal thickness – 5 microns. Foam compatible backing coat is available on request. Back coat can be in the same top coat color and DFT as required |
| Gloss (60˚) | Medium Gloss. Other gloss levels may be available on request. |
Guaranteed Paint Properties
| Test | Test Method | Description | Results |
| Hardness (Pencil) | ASTM D 3363 | Pencil | F or harder |
| Adhesion -T bend | ASTM D 4145 | T-bend | 3T or less |
| Flexibility | ASTM D 4145 | T-bend | 3T or less (no cracking) |
| Adhesion – Reverse impact | ASTM D 2794 | Reverse impact | > 10 joules |
| Cross Hatch | ASTM D 3359 | Cross hatch | > No paint removal |
| Gloss 60˚ (%) | ASTM D 523 | Gloss | 30-80 |
Expected Product Service Performance
| Property | Test Method | Description | Results |
| Resistance to Microorganism | ASTM E 2180 | 24 hours | 24 hours Staphylococcus aureus, E Coli- Min 99% reduction |
