Русский
Italiano
Français
Español
Deutsch
العربية
Molawan AntiBacterial
Molawan AntiBacterial is a Cost-Effective Pre-Painted Steel Developed to Provide Microbial Protection for Interior and Exterior Applications. Molawan Anti-Bacterial is a cost effective pre-painted steel developed to provide microbial protection for interior and exterior applications. The paint system consists of anti-microbial agents, applied on a Galvanized substrate of 90 GSM minimum zinc coating, with paint film thickness of 20 microns on weathering side. The anti-microbial agent in the paint is designed to inhibit the growth of odor causing bacteria and prevent product deterioration of the product from mold and mildew.
Standards
Substrate
Galvanized steel, minimum G30(90 GSM).
Standards & Grades
| Standard | Description | Sub-Strate Standard | Grades |
| SASO ASTM A755/ A755M | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Pre-painted by the Coil-Coating Process for Exterior Exposed Building Products | SASO ASTM A653/A653M | CS-Type A, B, C
FS Type A, B SS33, SS37, SS40, SS50, SS55, SS60 & SS80 |
| ASTM A755/ A755M | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Pre-painted by the Coil-Coating Process for Exterior Exposed Building Products | ASTM A653/A653M, ASTM A792/A792M
Aluminum Flat coils |
|
| EN10169 | Continuously organic coated (coil coated) steel flat products — Technical delivery conditions | EN 10346 | DX51D. DX52D
S220GD, S250GD, S280GD, S320GD, S350GD, S390GD, S420GD & S550GD |
| JIS G3312 | Pre-Painted Hot Dip Zinc coated Steel Sheet and Strip | JIS G3302 | SGCC, SGCD1
SGC340, SGC400, SGC440 & SGC570 |
| AS 2728 | Prefinished/pre-painted sheet metal products for interior/exterior building
applications—Performance requirements |
AS 1397 | S250, S300, S350, S450, S550 |
Typical Uses
Roofing and Walling, Sandwich Panels, Cool Rooms, Clean Rooms, Appliances, K-span, Shutter Doors, Door Frames
Dimensions:
| Thickness* (mm) (TCT-P) | Width** (mm) | Zinc coating (GSM) |
| 0.25 to 1.20 | From 700 to 1300 | 90 (G30) minimum |
* For grade SS50, minimum thickness is 0.46 mm
** For width less than 700 mm are supplied with slit edge
For specific dimensions please contact Sales and Marketing Dept.
TCT-P – Total Coated Thickness with Paint Film (Steel thickness + Zinc coating thickness + Paint thickness)
Advantages
- Surface Protection from Stain and Odor Causing Bacteria.
- Surface Protection from Molds and Discoloration.
- Reduces 99% of Most Common Bacteria.
- Cost Effective Solution for Antibacterial Applications.
- Higher Protection for Your Health and Environment.
Recommended for Clean Rooms, Cool Rooms and Cold Storage Cabins.
Note: This product is not an alternative to the good cleaning practices
| Pretreatment | Corrosion resistance proprietary conversion coating each side |
| Primer Coat | Universal Corrosion inhibitive Primer Nominal thickness 5µm each side |
| Finish Coat | Custom formulated system with Microbial Agent. Nominal thickness 15 µm on the top or weather side. |
| Backing Coat | Polyester based custom formulated off white or Foam compatible epoxy coat. Nominal thickness 5-7 µm . Back coat can be in the same topcoat color and DFT as required. |
| Gloss (60˚) | Medium Gloss. Other gloss levels may be available on request. |
Guaranteed Paint Properties
| Test | Test Method | Description | Results |
| Hardness (Pencil) | ASTM D 3363 | Pencil | F or harder |
| Adhesion -T bend | ASTM D 4145 | T-bend | 3T or less |
| Flexibility | ASTM D 4145 | T-bend | 3T or less (no cracking) |
| Adhesion – Reverse impact | ASTM D 2794 | Reverse impact | > 9 joules |
| Cross Hatch | ASTM D 3359 | Cross hatch | > No paint removal |
| Gloss 60˚ (%) | ASTM D 523 | Gloss | 30-80±5% |
Expected Product Service Performance
| Property | Test Method | Description | Results |
| Resistance to Microorganism | ASTM E 2180 | 24 hours | 24 hours Staphylococcus aureus, E Coli- Min 99% reduction |
