Accreditations
UNICOIL’s quality policy is a reflection of its commitment to earn the trust and satisfaction of its customers. The quality system at UNICOIL ensures strict adherence to both international and national standards, and UNICOIL is accredited with the following quality marks: Saudi Quality Mark (Saudi Standards, Metrology, and Quality Organization), EQM (Emirates Quality Mark, from The Emirates Authority for Standardization and Metrology [EASM]), and JQM (Jordanian Quality Mark, from the Jordan Standards and Metrology Organization [JSMO]), and Kuwaiti Quality Mark (KQM) from Kuwait Ministry of Commerce & Industry for its products.
UNICOIL quality system aims to achieve excellence by adopting a continual improvement approach. In recognition of its efforts, UNICOIL achieved ISO 9001 certification in 2003 and has maintained a clean record through all of its operations. UNICOIL is highly customer-focused and is aware of the needs of its customers in terms of quality, service, and aspirations. UNICOIL has a team of highly qualified people with international exposure who can respond quickly to customers making contact and provide outstanding customer service.
The UNICOIL laboratory is equipped with state-of-the-art test equipment for assuring conformance with all statutory and customer requirements. The Research and Development wing of UNICOIL is continually developing new products and also assists UNICOIL customers in investigating failures. UNICOIL carries out long-term performance tests to ensure the longevity of the products it provides to its customers.
Quality Marks
ISO Quality Certificate (ISO 9001:2008)
March 2006
ISO (International Organization for Standardization) is an independent, nongovernmental membership organization and the world’s largest developer of voluntary international standards. ISO is made up of 162 member countries, who constitute the national standards bodies around the world, with a central secretariat based in Geneva, Switzerland.
Read More
Saudi Quality Mark
February 2014
The Saudi Arabian Standards Organization, set up in 1972 (1392 AH), has responsibility for determining and enforcing approved standards of services, facilities, utilities, and products within the Kingdom of Saudi Arabia.
Read More
Information Security Management
December 2017
ISO/IEC 27001 is an international standard on how to manage information security. The standard was originally published jointly by the International Organization for Standardization and the International Electrotechnical Commission in 2005 and then revised in 2013.
Read More
Emirates Quality Mark
May 2014
The ESMA was established as the sole standardization body in the United Arab Emirates (UAE) under Law No. 28/2001. The board of directors chaired by H.E. Dr. Rashid Ahmed Bin Fahad, the Minister of Environment and Water in the UAE, comprises representatives of the main parties involved in standardization in the UAE. The board is responsible for laying down policies and adopting all of the procedures necessary to ensure the efficient performance of assignments
Read More
Jordan Quality Mark
April 2015
The JSMO was established as a public organization with financial and administrative autonomy in accordance with the Standards and Metrology Law No. 15 for 1994, amended in accordance with Law No. 22 for 2000. Prior to that, the organization had been one of the directorates in the Ministry of Industry and Trade.
Read More
Kuwaiti Quality Mark
December 2015
Standardization activities in Kuwait began in 1967, within a unit of the Ministry of commerce & Industry which became a Department after the law no. 128 for standardization was issued in 1977. The Department was transferred to the Public Authority for Industry in 1996 and became a sector for Standards and Industrial services including two Departments, one for standards & Metrology and the other for quality laboratories.
Read More
Metallurgical Testing and Calibration (ISO 17025)
April 2016
Dubai Accreditation center (DAC) is an accreditation body that complies with the requirements of ILAC (International Laboratories Accreditation Cooperation) and is a full member/MRA signatory. ILAC is the international organization for accreditation bodies operating in accordance with ISO/IEC 17011 and involved in the accreditation of conformity assessment bodies including calibration laboratories (using ISO/IEC 17025), testing laboratories (using ISO/IEC 17025).
Read More
Environmental Management System Standards (ISO14001)
January 2015
ISO 14001 was developed to provide a management system to help organizations reduce their environmental impact. The standard provides the framework for organizations to demonstrate their commitment to the environment…
Read More
Occupational Health & Safety Management System Standards (ISO 45001)
January 2015
The ISO 45001 standard is internationally accepted as a method of assessing and auditing occupational health and safety management systems. This standard was developed by leading trade and international standards…
Read More
Member of International Associations
UNICOIL is an active member of various reputed institutions specializing in galvanized and prepainted steel coils and sheets. These institutions support members by providing information about the latest developments in steel and coating technologies and product application trends via scientific videos, technical literature, and by organizing periodic meetings for exchanging knowledge, market information, and changes in regulations related to the business or product that serves in the best interests of UNICOIL and its customers.
National Committee for Steel Industry (NCSI)
Emanated from the Council of Saudi Chambers in 2015 to oversee the activities and directions of this strategic industry and to play a key role towards achieving Saudi Vision 2030, NCSI is a non-profit body and its members are the leaders of Saudi steel industry.
Read More
ASTM International
ASTM International is a globally recognized leader in the development and delivery of voluntary consensus standards. UNICOIL is an active member of ASTM International with voting rights.
Combined with our innovative business services, ASTM standards enhance performance and help everyone have confidence in the things they buy and use – from the toy in a child’s hand to the aircraft overhead.
Working across borders, disciplines and industries ASTM harnesses the expertise of over 30,000 members to create consensus and improve performance in manufacturing and materials, products and processes, systems and services.
Read More
Galvanizers Association
The Galvanizers Association was established in the USA and is now a worldwide organization with nearly 150 member companies. These companies are producers of galvanized continuous iron and steel sheets and pipes, and their suppliers. Meetings of the Galvanizers Association provides a forum for discussing topics pertaining to general galvanizing problems in order to advance the quality of galvanized products, thereby increasing their public acceptance.
Read More
European Coil Coating Association (ECCA)
The European Coil Coating Association (ECCA) was founded in 1967 and is based in Brussels. It has over 200 members spread over 18 countries and extraordinary members worldwide.
Mission & Objectives
- Increasing the awareness of prepainted metal through targeted marketing programmes
- Promoting the benefits of prepainted metal through the provision of innovative solutions and with particular emphasis on environmental, cost, quality and design benefits
- Stimulating market, application, product and process development
- Setting quality performance standards and developing test methods
- Granting of Quality and Sustainability Labels for prepainted metal on the basis of the technical and sustainability requirements defined in the ECCA Premium® Label manual and based on independent third party control
- Creating an industry network and forum for the development and exchange of ideas
- Representation of the Industry in its contacts with Public Officials, Public Authorities, other Trade Associations and Professional Bodies.
Read More
